What's Included - Axminster Professional AP310T2 Original Instructions Manual

Quantity Item
1 No 310mm Spiral Cut Thicknesser
1 No 7mm, 5.5mm Spanner
1 No Instruction Manual
Introduction
For the production of boards or frames to a uniform size, a
thicknesser is unbeatable. This compact machine has strength
in abundance with a cast iron frame and table, supported by a
welded steel chassis. This machine is powered by a 2.2kW
induction motor, driving the cutter block by a multi vee-type
belt, with the feed rollers with a tensioned chain drive.
The table is supported by a generous single column, has a
digital height gauge and can be locked into position. The table
also has support rollers at each end. The cutter block is the
increasingly popular helical type, this one having 6 rows of 14
indexing TCT cutters, giving an almost unbelievable finish. Each
cutter has 4 curved edges, so can simply be revolved to a fresh
edge when required. If one or more cutters is damaged, then
simply replace. Each edge lasts up to 10 times the expected
life of an HSS blade, so downtime for changing knives is much
reduced. Also, no setting is required, saving more time and
guaranteeing accuracy. The curved edge gives a shear style of
cut, much kinder on the timber than traditional square cutters.
There are two other main benefits of this type of cutter block:
much lower noise, and much reduced power required to drive
it, reducing the load on the motor and drive belt. The waste
chips are much more uniform, being easier to extract and
packing more into your extractor's waste container. This is a
compact machine, but capable of handling quite large board
runs or sizing frames or beams.
3

WHAT'S INCLUDED

Model Number
AP310T2