STARTING THE GENERATOR (CONTINUED)
Starting the Generator Using Natural Gas
36
1.
Turn breaker off
The breaker is located on the right side of the front power
panel. Flip the breaker down to prevent accidental load
when starting the generator.
2.
Turn gas type to natural gas
The fuel switch is located on the left front panel. Rotate
the switch to the Natural Gas position to turn on the fuel
supply.
3.
Connect hose
The quick connect inlet is located on the left-hand front
panel to the right of the fuel switch. Securely connect the
hose to the inlet.
4.
Turn fuel type to natural gas
The fuel switch is located on the left front panel. Rotate the
switch to the Natural Gas/Propane position to turn on the
fuel supply.