quickref.fm Page 21 Monday, February 25, 2002 4:09 PM
System Recovery
System Recovery
You need the 'System Recovery' CD that came with your
copier system.
If your copy system software does not start up when you turn
on the touch screen, you need to re-install the copier system
software.
WARNING
This procedure will automatically erase all the data on
your hard disk.
hp designjet copier cc800ps
a - With the system ON, insert the System Recovery CD in
the CD-ROM drive.
b - Power OFF the touch-screen and then power it ON
again.
Once recovery has started, it is automatic. Ignore any
menus. Remember to remove the CD when recovery is fin-
ished.
c - Power OFF the touch-screen and then power it ON
again.
21