HP Designjet cc800ps Reference Manual page 23

quickref.fm Page 19 Monday, February 25, 2002 4:09 PM
Previewing copies
When activated, the Resize Paper Frame Tool partitions the
areas around the Paper Frame into sections. When a section is
touched, the closest frame side or corner is resized to the new
position.
Move the image to get any part of it centered or visible in the
Preview Window.
There are two ways to move the image:
By dragging anywhere in the image window.
Centering by touch a point on the screen and that point will
then be centered in the preview window.
You can position the Paper Frame directly in the preview and
visually set your copy area.
There are two ways to move the frame:
By dragging anywhere on the screen. Imagine you are
gripping hold of the frame and dragging it around over the
image.
Centering by touching a point on the screen and that point
becomes the new center for the Paper Frame.
This method is especially useful when you are making spot
test strips for outputting on the printer. It lets you continuously
hp designjet copier cc800ps
Move Tool
Position the Paper Frame
19