quickref.fm Page 15 Monday, February 25, 2002 4:09 PM
Scanning thick media
Scanning thick media
NOTE
To scan thick media you may need to change the inser-
tion slot height and this can affect the copier's automatic
control of border lines between the cameras – called
Stitching.
To scan thick media, you can change the insertion slot height
on your copier from 0 to 15 mm (0 to .6"). You can fit the slot
to the thickness of your original.
To scan thick originals:
hp designjet copier cc800ps
a - Open the copier cover.
b - Press down on the platen as you pull first one slider,
and then the other (left and right), towards the copier's
center until the media thickness adjustment sliders
found at each side are the same setting.
15