Loading Media; To Change A Roll - HP Designjet 700 User Manual

Working With Media and Cartridge(s)

Loading Media

Loading Media

To Change a Roll

1 Make sure the plotter wheels are locked (the brake lever pressed down) to prevent
the plotter from moving.
2
If the old roll is not used up, then to remove the media from the media path:
a Raise the media lever to release the media.
b Open the roll cover and turn the media stop to wind the media out of the
plotter and onto the roll.
c Lower the media lever.
3-10
Raise the lever
Wind the roll
1840a