Changing Pen Widths And Colors/Shades Using The Plotter's Internal Palettes; To See The Current Palette Settings; Changing Pen Widths And Colors Using The Plotter's Internal Palettes - HP Designjet 700 User Manual

Changing Pen Widths and Colors Using the Plotter's
Internal Palettes
The plotter has three pen palettes. The factory palette cannot be changed. You
can, however, change the line width and color settings for each pen in the
remaining two palettes (called palette A and palette B). Initially, all three palettes
are identical. Each palette has 16 pens
and for the:
700
HP DesignJet 700 any of the plotter's 11 pen shades.
750C Plus
HP DesignJet 750C Plus, any combination of the plotter's internal 256 colors

To See the Current Palette Settings

1 Make sure either a roll or a sheet of media is loaded.
750C Plus
2 Make sure that the front panel Color/Mono switch is set to
3
Print the
simultaneously..
Notice on the Current Configuration Plot that the 16 pens are numbered 0
through 15.
The 256 colors are numbered 0 through 255. These colors are specified in the
750C Plus
Palette Plot, as explained on page 5-4.
1 We are discussing "conceptual" pens here.

Changing Pen Widths and Colors Using the Plotter's Internal Palettes

Current Configuration Plot
STATUS
Ready
Controlling a Plot's Overall Appearance
1
which can include pens of different widths
Color
and
, by pressing the
.
keys
Press these two
simultaneously
0014
5-3