Advertisement
ENGLISH
22
Problem
Water is leaking
from the bottom
of the shaver.
I replaced
the shaving
heads, but the
replacement
reminder symbol
is still showing.
A shaving
head symbol
is suddenly
showing on the
display.
Possible cause
The travel lock
is activated.
The shaving
unit is soiled
or damaged to
such an extent
that the motor
cannot run.
During cleaning,
water may
collect between
the inner body
and the outer
shell of the
shaver.
You have not
reset the shaver.
This symbol is
a replacement
reminder.
Solution
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
and 'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
'Replacement').
Replace the shaving heads
(see chapter 'Replacement').
Advertisement
