Philips S7310 Manual page 14

ENGLISH
14
8 Insert the lug of the shaving unit into the slot
in the top of the appliance. Then press down
the shaving unit to attach it to the appliance
('click').
Cleaning and maintenance
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal
shaving performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
1 Switch off the shaver.
2 Rinse the shaving unit under a warm tap for
some time.
3 Pull the shaving head holder off the bottom
part of the shaving unit.
4 Rinse the shaving head holder under a warm
tap for 30 seconds.
5 Carefully shake off excess water and let
the shaving head holder dry.
6 Reattach the shaving head holder to the
bottom part of the shaving unit ('click').