Paper Sizes - Canon imagePROGRAF GP-5300 Online Manual

Paper Sizes

Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 5.9 inches (150 mm) or less •
• • Inner diameter of paper core: 2 or 3 inches
• • Printing side out
Roll Paper Width
Roll paper width recommended
for borderless printing(*1,*2)
Minimum Paper Length
Maximum Printable Length
Thickness
*1:Borderless printing may not be available depending on the media type. For details on media types that
can be used for borderless printing, see "Paper Information List."
*2:You can perform borderless printing without specifying Roll paper width recommended for it. As
opposed to standard borderless printing, there will be a small margin on the left and right because the
paper width is set a little bit smaller than the width of the document.
Sheets
Sheets of the following sizes are supported.
Sheet Width
Minimum Paper Length
Maximum Printable Length
GP-300 / GP-5300 : 36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
GP-200 / GP-5200 : 24.02 in. (610.0 mm) to 8.00 in. (203.2 mm)
36 in Roll (914.4mm)
A0/A1 Roll (841.0mm)
B1/B2 Roll (728.0mm)
24 in Roll (609.6mm)
A1/A2 Roll (594.0mm)
B2/B3 Roll (515.0mm)
17 in Roll (431.8mm)
14 in Roll (355.6mm)
10 in Roll (254.0mm)
8.00 in. (203.2 mm)
Excludes cloth/canvas paper.
59 feet (18 m)
depends on the OS and application.
3 mil (0.07 mm) to 31 mil (0.8 mm)
GP-300 / GP-5300 : 36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
GP-200 / GP-5200 : 24.02 in. (610.0 mm) to 8.00 in. (203.2 mm)
11.00 in. (279.4 mm)
5.2 feet (1.6 m)
76