Canon imagePROGRAF GP-5300 Online Manual page 172

◦ Set printer name ◦
Specifies the printer name. You can use up to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ ◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD settings ◦
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).
▪ Enable/disable WSD ▪
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, and Windows 7.
▪ ▪ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
▪ ▪ Timeout settings
Specifies the timeout length.
◦ Bonjour settings ◦
Setting items for LAN using Bonjour.
▪ Enable/disable Bonjour ▪
Selecting Enable allows you to use Bonjour to perform the network settings.
▪ Service name ▪
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ SNTP settings ◦
Performs various settings for SNTP (Simple Network Time Protocol).
◦ Spanning tree settings ◦
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ LPR protocol settings ◦
Enables/Disables the LPR setting.
◦ RAW protocol ◦
Enables/Disables RAW printing.
172