Canon imagePROGRAF GP-5300 Online Manual page 237

Make sure the name on the touch screen is the same as that of your Wi-Fi Direct compatible
device and tap Yes.
Change Wireless Direct Connection Setting
1. 1. Make sure printer is turned on.
2. 2. On the HOME screen, tap
Home Screen Menu Composition
3. 3. Tap Wireless Direct.
4. 4. Tap Settings.
5. Change settings as necessary. 5.
• • To update the identifier (SSID) and the password for wireless direct
Tap Update SSID/password to display the confirmation screen.
To update the identifier (SSID) and the password, tap Yes.
To check the updated password, tap Show password.
• • To change the printer's name displayed on the Wi-Fi Direct compatible device
Tap Wireless Direct network (SSID) to display the printer's name (the initial value is "DIRECT-
XXXX-GP-NNNN") displayed on a Wi-Fi Direct compatible device.
Follow the procedure below to change the name.
1. Tap the device name entry field on the touch screen. 1.
2. 2. Enter device name (up to 32 characters).
3. Tap OK and confirm the entered device name. 3.
4. Tap OK. 4.
• To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting •
to the printer
Tap Connection request confirmation to display the confirmation screen.
If you want the printer to display the screen to inform you a Wi-Fi Direct compatible device is
connecting to the printer, tap Yes.
Important
• To prevent an unauthorized access, we recommend you should not change the setting from
the default.
When you finished performing the settings, the printer returns to the Wireless Direct settings screen.
(Network).
237