Canon imagePROGRAF GP-5300 Online Manual page 550

Accounting dialog box
Click Accounting to display the Accounting dialog box.
The Accounting dialog box allows you to add IDs to print jobs. You can then use the IDs, along with the
printer and cost management tool, to tabulate print history information.
Use a fixed Account ID./Use a fixed Department name./Use a fixed Project number.
Prohibits changes to account ID, department, and project number that have already been set.
Check this check box to prevent other users from changing IDs.
Account ID/Department/Project number
Enter the account ID, department, and project number that you want to set. Enter the ID by using
up to 20 alphanumeric characters (0 to 9, a to z, and A to Z).
If you've added checkmarks to Use a fixed Account ID., Use a fixed Department name., or
Use a fixed Project number., you'll be able to configure each setting.
Device Information dialog box
The Device Information dialog box allows you to obtain the device information of the connected printer,
and change the configuration to match the printer that is connected to the driver function.
Settings Summary
This is a list of items that you can set in the Device Information dialog box.
When you click an item that you want to set, the setting contents are displayed outside the box.
Device Type
The maximum supported roll paper width will be set to the initial value.
Hard disk
If a hard disc is equipped, it will be set to Yes.
Acquire Status
Obtain device type and hard disk information from the printer.
550