Replacing The Light Bulbs; If You Encounter A Problem - Bosch DWK09M760B Operating Instructions Manual

Replacing the light bulbs

Warning! Prior to touching the light bulbs
ensure they are cooled down.
1. Switch off the extractor hood and pull out
the mains plug or switch off the electricity
supply at the fuse box.
2. Remove the lamp cover, use a flat bladed
screw driver as a lever.
3. Replace the bulb (use only Halogenlamp
max. 20 Watt - G4 ).
4. Attach the lamp cover again.
5. Plug the appliance into the mains or
switch it on at the fuse box.

If you encounter a problem

If you have any questions or if a fault occurs,
please call Customer Service. (See list of
Customer Service representatives).
When you call, please quote the following:
E-Nr.
Enter the relevant numbers into the box
above.
The E-Nr. (product no.) and FD (production
date) are shown on the name plate which
can be seen inside the extractor hood after
the filter frame has been detached.
FD
35