Procedure For Tilting Down; Trim And Tilt Models) - Yamaha FL350A Owner's Manual

4. Once the outboard motor is supported
with the tilt support lever, press the pow-
er trim and tilt switch "
tract the trim rods. NOTICE: Make sure
that the trim rods retracts completely
during mooring. This protects the
rods from marine growth and corro-
sion, which could damage the power
trim and tilt mechanism.
EMU35515
Procedure for tilting down (power

trim and tilt models)

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3.
ZMU05824
" (down) to re-
[ECM00252]
"
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
Operation
ZMU05856
"
ZMU06258
ZMU05840
82