Table of Contents
Advertisement
VARIOUS FUNCTIONS
Setting " Energy Saving " mode
Setting to "Energy Saving" mode (Save, Trip), the operation is changed
to the following modes for energy saving.
Save electricity by lowering the cooling capability of each compartment.
Turning down the LED lights in the Refrigerator Compartment, the Vacuum
Compartment and the Vegetable Compartment for power saving if the door of the
Refrigerator Compartment is left open for more than 30 seconds.
※ If it is set to " Save " mode, the function continues to work until the setting is released.
Cooling down the inside of the refrigerator slowly leads to more reduction of power consumption.
(Set it to this mode when you go out for a long time such as travel).
※ When the door is opened/closed after it is set to "Trip" , it will be switched to "Save"
mode.
1
Touch
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
2
Touch
Each time you touch the button, the corresponding indicator lamp changes in the
order shown below:
The Energy Saving mode is set to "Off" (all lamps off) before shipping.
All the lamps off.
Fine adjustment of the temperature
Temperature settings for Refrigerator and Freezer Compartments can be more finely adjusted by 11 levels.
Usually it is recommended to use it at the setting of " ■■ " .
Open the door of the Lower
1
Freezer Compartment.
2
Touch
Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the
current settings are displayed.
3
Press down
or more until 1 beep is heard.
4
Close the door of the Lower
Freezer Compartment.
Locking the Control Panel
This can prevent erroneous operation of the Control Panel or misuse by children. When this indicator lamp
of the Control Panel) is illuminated, any other portion of the Control Panel will not be activated by touching it.
Touch
1
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
2
Press down
until the preset sound is heard.
Lock of the Control Panel is changed to "On" or "Off" .
It is set to [
54
Notice
● When connecting/disconnecting the power plug or after recovering from electric power failure, lock of the panel for operation may be released.
BB0040171T_R-E5000SHV_A.indd 54
button on the Control Panel to turn
button to change the settings as you like.
5
button on the Control
button for 5 seconds
button on the Control Panel to turn
button 3 seconds or more
] "Off" before shipping.
Notice
● When both "Save" / "Trip" and "Quic k (about
7 hours) " / " Freezer (about 120 minutes) "
/ " Fridge (about 50 minutes) " modes are set
concurrently, "Quick" / "Freezer" / "Fridge"
function is performed first, and it will be set to
"Save" or "Trip" mode after the operations are
completed.
● When both "Save" / "Trip" and "Veg" modes
are set concurrently, the cooling function will be
weakened from the "Veg" .
● When the temperature in the " Freezer
Compartment " / " Refrigerator Compartment "
is set to " ■ " , it will not be weakened so as
to maintain the freshness of foods while LED
lights in the Refrigerator Compartment and the
Vacuum Compartment only are turned down.
Caution
● Automatic temperature control lowers cooling loads,
which may cause ice cream to get soft and frost to
form on frozen food. It also requires longer freezing
time and ice making time.
(Refrigerator Compartment / Freezer Compartment)
Touch
or
adjustment.
The temperature becomes higher by 1 level every time you push the button.
(Pushing " MAX and more " returns to " MIN and under " .)
(
Lighting
Blinking
Turned off)
Indication
lamp
Setting
MI N and under MIN.
Follow the operations shown in Step 1, 2 and 3.
2 beeps sound and you can set the temperature by normal step (3 levels).
Setting of the
Control Panel's lock
"
indicator
lamp "
Preset sound
Pg.45, 49, 51
Pg.53
button to make an
MID.
MAX. MAX and more
(Lock
"On"
"Off"
(locked)
(unlocked)
On
Off
Long beep
2 beeps
15.4.7 1:50:38 PM
Advertisement
Chapters
Table of Contents
