Various Functions; Fine Adjustment Of The Temperature (Refrigerator Compartment / Freezer Compartment); Locking The Control Panel - Hitachi R-ZX740KN Instruction Manual

Table of Contents

Advertisement

VARIOUS FUNCTIONS

Fine adjustment of the temperature
Temperature settings for Refrigerator and Freezer Compartments can be more finely adjusted by 11 levels.
1
Open the door of the Lower Freezer Compartment.
2
Touch
All indicator lamps turn on, and then the current settings are displayed.
3
Press down
4
Close the door of the Lower Freezer Compartment.
5
Touch
Each time you touch the button, the corresponding indicator lamp changes in the order shown below.
Usually it is recommended to use it at the setting of " ■■ " .
(
Lighting
Indication
lamp
Setting
Follow the operations shown in Step 1, 2, 3 and 4.
2 beeps sound and you can set the temperature by normal step (3 levels).

Locking the Control Panel

Disenabling operations can prevent erroneous operations or misuse by children.
When this indicator lamp
not be activated by touching it.
Touch
1
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
2
Press down
until the preset sound is heard.
Lock of the Control Panel is changed to " On " or " Off " .
The locking of the Control Panel is set to " Off " ( "
Setting of the Control Panel's lock
"
62
button on the Control Panel to turn on the indicator lamp.
button for 5 seconds or more until 1 beep is heard.
or
button to make an adjustment.
Blinking
Turned off)
MIN and
MIN.
under
(Lock of the Control Panel) is illuminated, any other portion of the Control Panel will
button on the Control Panel to turn
button for 3 seconds or more
" On "
indicator lamp "
On
Preset sound
(Refrigerator Compartment / Freezer Compartment)
MID.
" is unlit) at the time of purchase.
" Off "
(locked)
(unlocked)
Off
Long beep
2 beeps
MAX and
MAX.
Notice
● The Auto Door function will not be disabled
even when the Control Panel is locked.
In order to stop Auto Door function, unlock
the Control Panel, and touch the
for 3 seconds or more until it beeps twice.
Pg.50, 51
● When connecting/disconnecting the power
plug or after recovering from electric power
failure, lock of the panel for operation may
be released.
● The indication is turned off after about 40
seconds for energy saving. This setting is
maintained until it is released.
more
button

Advertisement

Table of Contents
loading

Table of Contents