Recording and Playback
To play back from Digital Piano memory
1.
Press the bsSONG button.
2.
Use the clu and i arrow buttons to select
"MIDI PLAY".
M I D I P L A Y
3.
Use the bsSONG button to select the track
you want to play back.
• Each press of bsSONG button cycles through the
settings shown below.
L: Track 1
R: Track 2
L R: Track 1 and Track 2
4.
Press the bp/k button to start playback.
• For details about playback, see "Starting and
Stopping Playback" in "Operations Common to All
Modes" (page EN-8).
• You can change tempo, effect, and other settings
during playback.
EN-34
To adjust the playback volume level of a
MIDI Recorder song
1.
Press the btVOLUME button.
2.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
• The setting range is 0 to 127.
3.
Press the ckEXIT button to exit the setting
screen.
To delete recorded data
The following procedure deletes a specific track of a
song.
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select "Part Clear" and then press the
cmENTER button.
P a r t C l e a r
3.
Use the clu and i arrow buttons to select
the track to which you want to delete and then
press the cmENTER button.
• L: Track 1
R: Track 2
• This will cause the confirmation message "Sure?" to
appear.