Recording and Playback
To play back from Digital Piano memory
1.
Press the SONG button.
2.
Use the u and i arrow buttons to select
"MIDI PLAY".
M I D I P L A Y
3.
Use the SONG button to select the track you
want to play back.
• Each press of SONG button cycles through the
settings shown below.
L: Track 1
R: Track 2
L R: Track 1 and Track 2
4.
Press the /k button to start playback.
• For details about these operations (playback, pause,
rewind, fast forward, A-B repeat, etc.), see "Starting
and Stopping Playback" in "Operations Common to
All Modes" (page EN-8).
• You can change tempo, effect, and other settings
during playback.
EN-36
To adjust the playback volume level of a
MIDI Recorder song
1.
Hold down the SONG button until the setting
screen shown below appears.
2.
Use the q and w arrow buttons to select
"MIDI Volume".
3.
Use the u (–) and i (+) arrow buttons to
adjust the volume.
• The setting range is 0 to 127.
4.
Press the EXIT button to exit the setting
screen.
To delete recorded data
The following procedure deletes a specific track of a
song.
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
Hold down the REC button until the setting
screen shown below appears.
2.
Use the q and w arrow buttons to select
"Part Clear" and then press the ENTER
button.
P a r t C l e a r