Table of Contents
Advertisement
4.
Press the cli arrow button to execute the
delete operation.
• To cancel the delete operation, press the clu arrow
button.
• The message "Please Wait..." will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. "Complete!" appears on the display after
the operation is complete.
Audio Recorder (Recording to
a USB Flash Drive)
Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files*). If you play
along on the Digital Piano as you play back data stored
in Digital Piano memory, the memory playback and
your keyboard play are both recorded to USB flash
drive.
* Linear PCM, 16bit, 44.1 kHz, Stereo
• Each new recording of audio data to a USB flash
drive is automatically assigned a new file name, so
existing data is not overwritten.
• Concert Play song playback tones cannot be
recorded to a USB flash drive by Audio Recorder.
• Never remove the USB flash drive while Audio
Recorder recording or playback is in progress. Doing
so can corrupt the data on the USB flash drive and
damage the USB flash drive port.
To record keyboard play to a USB flash
drive
PREPARATION
• Be sure to format the USB flash drive on the Digital
Piano before using it. See "USB Flash Drive" on page
EN-44 for more information.
1.
Insert the USB flash drive into the Digital
Piano's USB flash drive port.
• When you plug in a USB flash drive, the Digital Piano
initially needs to "mount" the USB flash drive and
prepare for data exchange. Note that Digital Piano
operations are momentarily disabled while a USB
flash drive mounting sequence is being performed,
which is indicated by the cpUSB button lamp
flashing. The lamp will stop flashing and remain lit
after mounting is complete. It may take up to 10 or 20
seconds or even longer for a USB flash drive to be
mounted. Do not attempt to perform any operation
on the Digital Piano while a mounting sequence is in
progress. A USB flash drive needs to be mounted
each time it is connected to the Digital Piano.
2.
Press the bqREC button.
• "Rec Wait..." appears on the display indicating
record standby.
3.
Use the clu and i arrow buttons to select
"AUDIO REC".
4.
Press the bp/k button to start recording.
• You can also start recording by simply playing
something on the keyboard.
5.
To stop recording, press the boY button.
• Data recorded with Audio Recorder is stored as
WAV files on the USB flash drive. Files are
automatically assigned names in sequence from
"TAKE01.WAV" through "TAKE99.WAV".
• If you want to continue recording, perform the
operations from step 2 of this procedure. To play
back something immediately after you record it,
press the bp/k button.
Recording and Playback
EN-35
Advertisement
Table of Contents
