Table of Contents
Advertisement
Using the Metronome
The metronome lets you play and practice along with a
steady beat to help keep you on tempo.
To start and stop
1.
Press 8METRONOME button.
• This starts the metronome.
• This causes the button lamp to light.
• This will cause the bp/k button lamps to flash in
time with the currently set tempo. The bp/k
button left lamp flashes on the first beat of each
measure, while the right lamp flashes on the
remaining beats of the measure.
Flash
2.
Press 8METRONOME button again to stop
the metronome.
• This will cause the 8METRONOME button and
bp/k button lamps to become unlit.
To adjust the tempo
1.
Use the 9TEMPOw (–) and q (+) buttons
to set the tempo you want.
• Press the 9TEMPOw and q buttons at the same
time sets the tempo of last selected song.
• The setting range is 20 to 255.
• Changing the metronome speed (tempo) also
changes the playback tempo of Music Library songs
and MIDI Recorder songs.
To configure metronome settings
1.
Hold down the 8METRONOME button until
the screen shown below appears.
2.
Use the clw and q arrow buttons to one
of the items below.
Display
Description
Name
Beat
Beat. Specifies the beat setting. The
first beat of each measure is a bell
sound, while the remaining beats are
clicks.
• A Beat setting of "0" plays a straight
click, without a bell sound.
Volume
Volume. Adjusts the metronome
volume.
3.
Use the clu (–) and i (+) arrow buttons to
change the setting.
4.
Press the ckEXIT button to exit the setting
screen.
Playing with Different Tones
Beat
Volume
Setting
Range
0 to 9
0 to 127
EN-19
Advertisement
Table of Contents
