Table of Contents
Advertisement
Installation
Chimney assembly
The chimney cannot be installed in recircu-
lation hood with the filter cover.
Fasten the angle iron 15 to the hood canopy
using the screws 12d provided.
en
Upper Chimney
Slightly widen the two sides of the upper Chim-
ney and hook them behind the brackets 7.2.1,
making sure that they are well seated.
Secure the sides to the brackets using the 4
screws 12c supplied.
Make sure that the outlet of the extensions
���
pieces is aligned with the chimney outlets.
�
���
���
�
���
Lower Chimney
Slightly widen the two sides of the Chimney
and hook them between the upper Chimney
and the wall, making sure that they are well
seated.
Fix the lower part laterally to the hood body us-
ing the 2 screws 12c supplied.
14
��
���
��
���
�����
�����
���
���
���
���
���
���
Advertisement
Table of Contents
