Installation Steps - I-Tech SNK117 Series User Manual

Installation Steps

Before installation, please make sure all computers are turned on and its
operating system are running properly with keyboard and mouse.
1.
2.
3.
4.
Rev. : 1.0
12. KVM Session
Connect the 2-in-1KVM cable to the one of your server.
USB Type A Male connector to the USB Port
HDDB 15-pin Male connector to the VGA Port
PC I/O windows diagram
Plug the power adapter included to the switch.
DC
Power
Connect the another end of the 2-in-1 cable to the USB KVM switch
Reset USB KVM Switch by membrane
To VGA port
P.18