Table of Contents
Advertisement
RKP1015 / RKP1017
Rev. : 1.0
11. KVM Session
Installation Steps
Before installation, please make sure all computers are turned on and its
operating system are running properly with keyboard and mouse.
1.
Connect the 3-in-1 KVM cable to the one of your server.
Mini Din 6-pin Male connector to the USB Port
●
HDDB 15-pin Male connector to the VGA Port
●
2.
Plug the power adapter included to the switch.
DC
Power
3.
Connect STP / UTP cable to the switch.
Remote
Console
4.
Connect the another end of the 3-in-1 cable to the LCD Keyboard
Drawer
5.
Connect another end of the STP / UTP cable and mouse, keyboard &
monitor to the receiver.
Local
Console
6.
Reset PS/2 KVM Switch (Two Consoles) by membrane
. . . . . . . . . . . . .
P.18
User Manual
Advertisement
Table of Contents
