Table of Contents
Advertisement
L7VTA3 V3.1a
WOL/WOM Resume (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the
date (day of the month), hour, minute and second to turn on your system.
When set to 0 (zero) for the day of the month, the alarm will power on your
system every day at the specified time.
IRQs Activity Monitoring
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Primary INTR
IRQ 3
(COM2)
IRQ 4
(COM1)
IRQ 5
(LPT2)
IRQ 6
(Floppy Disk)
IRQ 7
(LPT1)
IRQ 8
(RTC Alarm)
IRQ 9
(IRQ2 Redir)
IRQ 10
(Reserved)
IRQ 11
(Reserved)
IRQ 12
(PS/2 Mouse)
IRQ 13
(Coprocessor)
IRQ 14
(Hard Disk)
IRQ 15
(Reserved)
↑ ↓ → ← : MoveEnter : Select
F5:Previous Values
This screen enables you to set IRQs that will resume the system from a power
saving mode.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system
from a power saving mode.
Press <Esc> to return to the previous screen.
IRQs Activity Monitoring
[ON]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
47
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
