Table of Contents
Advertisement
L7VTA3 V3.1a
CPU Installation Procedure
The following illustration shows CPU installation components:
Note: The pin -1 corner is marked with an arrow
Follow these instructions to install the CPU:
1.
Pull the CPU socket locking lever away from the socket to unhook it and raise
the locking lever to the upright position.
2.
Identify the pin A-1 corner on the CPU socket and the pin A-1 corner on the
processor.
3.
Swing the locking lever down and hook it under the latch on the edge of the
socket.
4.
Apply thermal grease to the top of the CPU.
5.
Lower the CPU cooling fan/heatsink assembly onto the CPU.
6.
Secure the two retention clips
on either side of the
fan/heatsink unit onto the socket
base.
Fan/heatsink unit
secured to socket
14
Advertisement
Table of Contents
