Advertisement
Available languages
Available languages
MAINTENANCE
11
Removing and cleaning the brushbar
Using a crosshead
screwdriver, undo the
2 screws and remove
the belt guard.
Pull and slide the right
side brushes together
with the brushbar.
Remove the side cap
from the brushbar and
unloop the brushbar
from the belt.
Attach the other side
of the brushbar to the
side brushes. Slide onto
the side of the base
and into place.
Using a crosshead screwdriver remove the 4
screws on the side brushes and the top and
bottom screws from each of the rug guards
(metal pins) to get access to the brushbar.
Using a pair of
scissors, remove any
threads or hair caught
around the brushes.
Rinse under water
(max 40°C) to remove
debris.
Refit the belt guard and tighten the 2 screws.
Replace and tighten the 4 screws on the side
brushes and refit the rug guards tightening the
4 screws to secure.
To refit, loop the brushbar
through the belt and onto
the belt grip.
Pull and slide the left
side brushes and
remove the side cap
from the brushbar.
Line up the 'right' side
brushes with the base
and slide into place.
Attach the brushbar to
the side brushes.
Advertisement
