Follett Horizon Elite HCC1010A Operation And Service Manual page 20

10. Remove 3 screws (with 3/16" allen wrench) then
remove auger and main housing together.
Note: Auger is sharp - wear protective gloves.
11. Rotate auger to align opening in auger flange with
stream divider.
12. Pull out auger.:
13. Remove and discard the ceramic mating ring and
shaft seal.
20
Fig. 17
Fig. 18
Fig. 19
HCC1010A/W, HCD1010A/W, HCC1410A/W, HCD1410A/W