Seat; Helmet Holder - Yamaha XT250T Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
1. Remove panels A and B. (See
page 6-5.)
1
2. Remove the bolts and pull the seat
off.
2
3
4
5
6
1. Bolt
7
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
8
shown.
9
EAU13981
2
1
(×2)
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1
3-8

Helmet holder

1
1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, turn the key
to the original position, and then re-
move it.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU14290
2
EWA10160