Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha XT250T Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1
removing the screws.
2
1
3
4
2
5
1. Tail/brake light lens
6
2. Screw
2. Remove the defective bulb by
7
pushing it in and turning it counter-
clockwise.
8
9
EAU24131
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-31
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1
by removing the screw.
2
1. Turn signal light lens
2. Screw
ECA10680
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24201
1