Rear Wheel - Yamaha XT250T Owner's Manual

retainer on the fork leg.
1
1. Retainer
3. Insert the wheel axle, and then in-
stall the axle nut.
4. Lower the front wheel so that it is
on the ground.
5. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
85 Nm (8.5 m·kgf, 62 ft·lbf)
6. Connect the speedometer cable,
and then install the speedometer
cable holder by installing the
screw.
7. Install the brake disc cover by in-
PERIODIC MAINTENANCE AND MINOR REPAIR
stalling the screws.
8. Install the engine guard by install-
ing the bolt.
6-34

Rear wheel

To remove the rear wheel
WARNING
G
It is advisable to have a Yamaha
dealer service the wheel.
G Securely support the motorcy-
cle so that there is no danger of
it falling over.
1. Remove the engine guard by re-
moving the bolt.
1
1. Engine guard
2. Bolt
2. Remove the brake pedal free play
adjusting nut, and then disconnect
EAU25080
EAU25470
EWA10820
2
3
4
5
6
7
8
2
9