Front Wheel - Yamaha XT250T Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Front wheel

To remove the front wheel
1
WARNING
2
G
It is advisable to have a Yamaha
dealer service the wheel.
3 G Securely support the motorcy-
cle so that there is no danger of
it falling over.
4
1. Remove the engine guard by re-
5
moving the bolt.
6
7
8
9
1. Engine guard
2. Bolt
2. Remove the brake disc cover by
removing the screws.
EAU24360 3. Remove the speedometer cable
holder by removing the screw.
4. Disconnect the speedometer ca-
EAU24690
ble from the front wheel.
5. Remove the axle nut.
EWA10820
1
1. Brake disc cover
2. Screw
3. Speedometer cable holder
4. Speedometer cable
5. Axle nut
6. Lift the front wheel off the ground
2
according to the procedure on
1
page 6-32.
7. Pull the wheel axle out, and then
remove the wheel.
CAUTION:
Do not apply the brake after the
2
3
4
5
ECA11070
6-33
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jections mesh with the slots.
1. Speedometer gear unit
2. Lift the wheel up between the fork
legs.
NOTE:
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the slot in
the speedometer gear unit fits over the
EAU25011
1