Keyboard And Pointing Device Problems - HP Pavilion XT115 Reference Manual

Troubleshooting and Maintenance
Troubleshooting Your Computer

Keyboard and Pointing Device Problems

Use these suggestions for built-in or external devices.
If the pointer is difficult to control
Adjust the pointer controls: click Start, Control Panel, Printers and Other Hardware,
Mouse.
If the touch pad doesn't work
Press the touch pad on-off button so the light turns on.
Don't touch the touch pad while the computer is rebooting or resuming from Standby
mode. If this happens, try the following: press a key on the keyboard to restore
normal operation, or suspend and resume operation using the power button.
If an external mouse is connected, the built-in pointing devices are normally disabled.
You can change this setting with the BIOS Setup utility—see "To run the BIOS Setup
utility" on page 118.
Restart the computer: click Start, Turn Off Computer, Restart.
If the touch pad moves the pointer or cursor while you type
Press the touch pad on-off button to turn off the touch pad while you type.
If a PS/2 scroll mouse doesn't work
The touch pad must be disabled for the mouse's scroll feature to work. In the BIOS
Setup utility, make sure the External Pointing Devices option in the System Devices
menu is set to Auto. See "To run the BIOS Setup utility" on page 118.
Suspend or shut down the computer before you attach the scroll mouse, so that it will
be detected properly.
If you want to use the touch pad again, you must suspend or shut down the computer
before you detach the scroll mouse.
Test the keyboard and pointing devices with the e-Diagtools diagnostics. See "Testing
the Hardware" on page 115.
If the embedded numeric keypad doesn't work
To type numbers, make sure Num Lock is on.
102 Reference Guide