Denon PMA-600NE Owner's Manual page 9

Contents Connections
Q0 Q1 Q2
J BASS control knob
This setting adjusts the volume level for the bass. (v p. 25)
K TREBLE control knob
This setting adjusts the volume level for the treble. (v p. 25)
L BALANCE control knob
This adjusts the balance of the volume output from the left and right
speakers. (v p. 25)
M BLUETOOTH/PAIRING button
This switches the input source to "BLUETOOTH". It is also pressed
during the pairing operation. (v p. 28)
Front panel Rear panel
Playback
N DIGITAL IN/BLUETOOTH indicator
Q3 Q4 Q5 Q6
O INPUT SELECTOR knob
P Input indicators (v p. 25)
0 0, a and b can be adjusted when 6 is off (SOURCE DIRECT mode is off).
Remote control 9
unit
Settings Tips
This is displayed as follows, according to the status of the digital
0
audio signals that are input to the digital audio input terminals on this
unit.
Lit in green: Playback is supported on this unit
0
Blinking in green: Playback is not supported on this unit
0
Off: Sampling frequency cannot be detected
0
0 For details on the audio signal specifications that are compatible with this
unit, see "D/A converter" (v p. 43).
This is displayed as follows according to the Bluetooth connection
0
status:
Blinking in blue (intervals of about 1 second): Pairing mode
0
Blinking in blue (intervals of about 2 seconds): Searching mode
0
(searching for a paired Bluetooth device and attempting to
connect via Bluetooth)
Lit in blue: Connecting mode (a Bluetooth connection has been
0
made with a Bluetooth device)
Off: Waiting mode (a Bluetooth connection has not been made
0
with any Bluetooth device)
This selects the input source. (v p. 25)
Index
Appendix