Denon PMA-600NE Owner's Manual page 42

Contents Connections
Audio from digital devices cannot be played back (Coaxial/Optical)
The DIGITAL IN/BLUETOOTH indicator is off.
When digital audio signals cannot be detected properly, the DIGITAL IN/BLUETOOTH indicator is off. (v p. 30)
0
The DIGITAL IN/BLUETOOTH indicator is blinking in green.
The DIGITAL IN/BLUETOOTH indicator blinks in green when audio signals that are not supported by this unit are input. Check the audio output signal
0
format from your digital device. (v p. 30)
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
0
Front panel Rear panel
Playback Settings
Remote control 42
unit
Tips
Index
Appendix