Top Cover Trim - HP Pavilion DV9500 Maintenance And Service Manual

If it is necessary to replace the fingerprint reader board cable, release the ZIF connector (1) to which
6.
the cable is connected and disconnect the cable (2) from the system board. The fingerprint reader
board cable is included in the Cable Kit, spare part number 448015-001.
Reverse this procedure to install the ExpressCard assembly and the fingerprint reader board cable.

Top cover trim

Description
Top cover trim
Before removing the top cover trim, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
g.
Battery on page 47).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 63)
Speaker assembly on page
Display assembly on page
Top cover on page 75)
59)
61)
66)
69)
Component replacement procedures
Spare part number
432978-001
87