Top cover trim (see
k.
Rear USB board (see
l.
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
Memory modules (see
●
RTC battery (see
RTC battery on page
●
WLAN module (see
●
Bluetooth module (see
●
ExpressCard assembly (see
●
Optical drive connector board (see
●
Remove the system board:
Turn the computer upside down with the front toward you.
1.
Remove the Phillips PM2.5×8.0 screw that secures the system board to the base enclosure.
2.
Turn the computer right-side up, with the front toward you.
3.
Top cover trim on page
Rear USB board on page
Memory module on page
56)
WLAN module on page
Bluetooth module on page
ExpressCard assembly on page
System board on page
87)
90)
54)
57)
82)
85)
92)
Component replacement procedures
93