Replacing A Drive In The Secondary Hard Drive Bay - HP Pavilion DV7-4060 User Manual

6. Tighten the hard drive cover screws (3).
7. Replace the battery.
8. Turn the computer right-side up, and then reconnect external power and external devices.
9. Turn on the computer.

Replacing a drive in the secondary hard drive bay

CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on or in Sleep or Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn on the computer by pressing the
Power button, and then shut down the computer through the operating system.
The computer is equipped with a secondary hard drive bay. This bay might be empty or occupied by a
secondary hard drive.
To remove the secondary hard drive:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external hardware devices connected to the computer.
4. Disconnect the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the hard drive bay toward you.
6. Remove the battery from the computer.
7. Remove the five hard drive cover screws (1).
To prevent information loss or an unresponsive system:
Replacing a drive in the secondary hard drive bay 59