Table of Contents
Advertisement
Using the touchscreen (select models only)
The touchscreen allows you to make selections or activate items on the screen using your finger.
The touchscreen functions with the default calibration or with a calibration set by another user. However,
HP recommends calibrating the touchscreen. Calibration optimizes digitizer performance for all users
and particularly for left-handed users.
Calibrating the touchscreen
To calibrate touch:
1.
Double-click the calibration desktop icon.
- or -
Select Start > Control Panel > Tablet Properties, and then select the Calibrate Touch tab.
2.
Follow the on-screen instructions.
●
Use your finger to touch the exact center of each of the calibration markers. The calibration
markers are displayed on the screen as plus signs (+). This will calibrate the touch.
●
Be sure to calibrate the touch for use in all 4 screen orientations. Use the screen rotate button
on the display to rotate the screen to a new orientation.
●
Do not change the screen orientation until you have completed the calibration.
Performing actions on the touchscreen
Use a plastic computer pen or your fingernail to perform click or flick actions.
The instructions in this section are based on the preferences set at the factory. To modify settings for
recognized clicks and flicks select Start > Control Panel > Hardware and Sound > Pen and Touch.
Using pointing devices
23
Advertisement
Table of Contents
