Table of Contents
Advertisement
Fingerprint reader board
Description
Fingerprint reader board
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the Phillips PM2.0×3.0 screw (1) that secures the fingerprint reader board and bracket
to the top cover.
3.
Release the ZIF connector on the fingerprint reader board and disconnect the cable (2) from the
connector.
4.
Remove the fingerprint reader board bracket (3) from the top cover.
62
Chapter 4 Removal and replacement procedures
Battery on page
41).
Hard drive on page
53)
Optical drive on page
Keyboard on page
57)
Top cover on page
59)
55)
Spare part number
608225-001
Advertisement
Table of Contents
