Table of Contents
Advertisement
Top cover
Description
Top cover (includes Touchpad and bracket, button board, and cable)
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
Remove the top cover:
1.
Turn the computer upside down with the front toward you.
2.
Remove the two feet near the battery (1) and the 11 Phillips PM2.5×7.0 screws (2) that secure
the top cover to the base enclosure. Two of the screws are under the feet.
Battery on page
41)
Hard drive on page
Optical drive on page
Keyboard on page
57)
53)
55)
Component replacement procedures
Spare part number
608224-001
59
Advertisement
Table of Contents
