HP OmniBook XE3 Startup Manual page 31

System Hibernation
Saves the current session to disk, then
Action
shuts down. Provides maximum power
savings while still allowing you to recover
the current session. Restores network
connections.
When Click Start, Shut Down, Hibernate
(Windows ME and Windows 2000)
-OR-
Configure lid, power button, or sleep button
to perform the hibernation action. Then
close lid or press button (Windows 98,
Windows ME, and Windows 2000).
-OR-
Press Fn+F12 (in Windows 2000 only)
Slide the power switch to the left to recover
Resume
your current session. This may take
several minutes.
Hibernate mode also occurs automatically when battery power reaches a critically low
level. See "To respond to a low-battery warning" on page 34. In Windows 98, hibernate
mode occurs automatically with critical low battery power only; and manual initiation of
hibernate is not available by default (except, if you wish, you can modify the default
setting for the power switch or the standby button to manually initiate hibernate mode
instead).
Off
Turning off your computer provides
Action
maximum power savings. The current
session is not saved and unsaved data will
be lost.
Click Start, Shut Down, Shut down
When
(recommended)
-OR-
Slide the power button and hold for 4
seconds
-OR-
Configure a power button (same as
Hibernate mode).
Slide the power switch to the left to start a
Resume
new session. This may take several
minutes.
Traveling with Your Computer
Managing Power Consumption
Startup Guide 31