Creating The Omnibook Diagtools Floppy Diskette Locally - HP OmniBook 2100 User Manual

There are two files available for downloading:
The OmniBook DiagTools utility. A compressed file (with the extension .EXE)
which contains all the files necessary for running OmniBook DiagTools.
The User's Guide for OmniBook DiagTools – the document you are reading. It is
a PDF file which can be viewed and printed using Adobe's Acrobat Reader.
(The Adobe Acrobat Reader can be downloaded free of charge from HP's
World Wide Web site.)
After you have downloaded the DiagTools file, follow the instructions included with
the file:
Creating the OmniBook DiagTools Floppy Diskette
Locally
You can create the OmniBook DiagTools floppy diskette locally. After inserting a
formatted floppy diskette in the floppy drive, do one of the following to create an
OmniBook DiagTools floppy diskette:
On an OmniBook with a factory software installation, run
\Dmi\Hpdiags directory on the hard disk. To do this in Windows, double-click
the file.
–or–
For an OmniBook with TopTools installed, use the DiagTools tab to create the
diskette.
On any computer with a CD-ROM drive, run
\Omnibook\Drivers\Hputils or \OmniBook\Dmi\Hpdiags directory on the
Recovery CD that came with the OmniBook PC. To do this in Windows, double-
click the file.
Starting OmniBook DiagTools
from the
from the
1-3