Indicator And Projector State - Ask Proxima C3000 Series Manual

Indicator and projector state

Check the indicator to know about the state of projector.
Indicator
POWER
(Green/Red/Blue)
?
or
....Green
....Green flashes
* When the lamp reaches the end of its life, the WARNING indicator lights red. In this case,
replace the lamp with a new one promptly.
Downloaded From projector-manual.com ASK Manuals
WARNING
(Orange/Red)
In power-off state (AC power cord not connected).
In normal working state.
In standby state. Press POWER to power on the projector.
Internal temperature too high and can't be turned on. When the
projector is cool enough, the temperature is restored to the normal
value and the POWER indicator lights red, you can turn on the
projector .
In suspension state.
Ready for standby mode or the lamp is being cooled. Before you
turn on the projector, you should wait till the lamp is cool enough
and the WARNING indicator flashes.
Can't be turned on because error is detected. You should unplug
the power cord. Then insert it again and power on the projector.
If the projector is powered off again, you should cut off the power
and contact the local distributor or repair center. In this case, stop
the projector. Otherwise, electric shock or fire may occur.
The service life of the lamp is over. You should replace it with a
new one in time.
When the projector is cool enough, the temperature is restored to
the normal value , you can turn on the projector. the WARNING
indicator stops flashing.
....Red
....Red flashes
State of projector
?
....Orange
?
....Orange flashes
Appendix
....Off
55