Basic operation
Remote control operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the
buttons enables you to make the desired operation quickly without calling up the screen menu.
INPUT button
Press INPUT button on the remote control to
select the input source.
FREEZE button
Press FREEZE button to freeze the picture on the
screen. To cancel the freeze function, press the
FREEZE button again or press any other button.
MUTE button
Press MUTE button on the remote control to turn
off the volume. Press MUTE button again or any
other buttons to cancel mute function.
LAMP button
Press LAMP button to select a lamp mode to
change the brightness of the screen.
Normal ..Normal brightness
Auto....... Adjust the lamp brightness
according to the input signal.
ECO ..... Lower brightness, reducing the
lamp power consumption and
extending the lamp life.
IMAGE button
Press IMAGE button on the remote control to
select the image mode you desire.
INFO button
Press INFO button on the remote control to
display the projector information.
VOLUME +/- button
Press image VOLUME +/- button on the remote
control to increase or decrease the volume.
24
Downloaded From projector-manual.com ASK Manuals
Remote control
INPUT button
VOLUME +/- button
Note:
See the next page for the description of other
buttons.
LAMP button
INFO. button
FREEZE button
IMAGE button
MUTE button