Memory Module - HP Mini 210-1010 Maintenance And Service Manual

Memory module

Description
2048-MB memory module (667-MHz, DDR2)
1024-MB memory module (667-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the memory module:
1. Pull away the retention clips (1) on each side of the memory module to release the memory
module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
2. Grasp the edge of the memory module (2), and then pull it out of the memory module slot.
NOTE:
memory module slot.
Reverse this procedure to install the memory module.
Battery on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
38).
Service cover on page 40).
Component replacement procedures
Spare part number
589666-001
589665-001
47