Table of Contents
Advertisement
Restoring default settings in Setup Utility
The following procedure explains how to restore Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
the Startup Menu displays, press the
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press the
3.
When the Setup Confirmation appears, press the
4.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the
Setup Utility default settings go into effect when the computer restarts.
NOTE:
Password, security, and language settings are not changed when you restore the factory
default settings.
ENWW
f10
key.
enter
enter
key.
key.
Computer Setup in Windows 7
f10
key.
esc
key. When
enter
key.
87
Advertisement
Table of Contents
