Compaq Evo N620c Series Software Manual page 64

MultiBoot (Advanced Users Only)
2. Use the arrow keys to locate the menu option for the device
you wish to enable.
❏
❏
3. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.
✎
To connect a NIC to a PXE (Preboot eXecution Environment) or
RPL (Remote Program Load) server during startup without using
MultiBoot, quickly press
message appears briefly in the lower right corner of the screen.
6–4
To enable bootable media in USB drives or in drives
inserted into a Port Replicator, use the arrow keys to
select the Advanced menu > Device Options. Select
Enable USB Legacy Support in the Device Options field.
To enable a NIC, use the arrow keys to select the
Security menu > Device security. Select Enable Internal
network adapter boot. Select PXE or RPL in the Boot
mode field.
when the Network Service Boot
F12
Software Guide