Display Assembly - HP EliteBook 8740W Maintenance And Service Manual

2. Lift the processor (2) straight up and remove it.
NOTE:
with the triangle (4) embossed on the processor socket.
Reverse this procedure to install the processor.

Display assembly

NOTE: The display assembly spare part kit includes the display panel cable, 3 WLAN antenna
transceivers and cables, and 2 WWAN antenna transceivers and cables.
Description
17.0-in, WUXGA+ WVA AntiGlare LED display assembly with webcam
17.0-in, WUXGA+ WVA AntiGlare LED display assembly without webcam
17.0-in, WSXGA+ WVA AntiGlare LED display assembly with webcam
17.0-in, WSXGA+ WVA AntiGlare LED display assembly without webcam
17.0-in, WXGA+ WVA AntiGlare LED display assembly with webcam
17.0-in, WXGA+ WVA AntiGlare LED display assembly without webcam
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
74 Chapter 4 Removal and replacement procedures
When you install the processor, the gold triangle (3) on the processor must be aligned
Battery on page 46).
Spare part number
595708-001
595704-001
595707-001
595703-001
595706-001
595702-001
ENWW