Table of Contents
Advertisement
Installation
10
Installing Shelves
Your refrigerator was shipped with the
shelf hanger and shelf locking clip installed
in their shipping position. Below are the
instructions to install the shelves in your
desired locations.
1 Remove shelf from its locked position
by pulling the slide mechanism
toward you.
2 Lift the hanger directly upwards and
pull toward you to remove it from the
ladder.
3 Place top hooks of the hanger into
the desired slot, and lower straight
down until lower hooks rest on the
ladder.
CAUTION
Shelves must be removed prior to
moving the refrigerator.
4 Relock shelf by pushing the slide
mechanism away from you.
5 While holding shelf at a 45-degree
angle with the gray handle facing
you, push the shelf into the back of
the hanger.
6 Gently set the shelf onto the hanger
once the back is secured by the
hanger.
Advertisement
Table of Contents
